Platform Lift & Home Lift
Installation Egremont

A home or platform lift in Egremont typically ranges from around £15,000 to £30,000, depending on the number of floors served, the finish you choose and any building work needed beforehand. A simple through-floor lift in a miners' terrace sits at the lower end, while a glazed commercial lift on the main street costs more. After a free site survey we give a fixed written quote, with no obligation to go ahead.

Most home lifts in Egremont are fitted inside the house and count as internal alterations, so planning permission is rarely required. External work, or any change to a listed building near the castle, may need consent, and we will say so clearly at survey if it applies. The lift itself must satisfy Building Regulations, which our engineers handle as part of every installation.

Most home and platform lift installations in Egremont take three to five days from start to finish. A straightforward through-floor lift in a terraced house can be working within a couple of days, while a commercial lift, or one needing structural preparation first, may take a little longer. We agree the timetable with you in advance and keep disruption to your home or premises low throughout.

Yes. Many homes around the castle are former miners' cottages and terraces with solid walls and modest room heights, and our through-floor and home lifts are built to work within that kind of property. We survey the joists, headroom and floor structure first, then choose a compact lift that fits without major alteration, so a traditional Egremont cottage keeps its character while gaining safe, step-free access between floors.

It depends on your needs. A stairlift carries one seated person up the stairs and costs less, but a platform or home lift takes a wheelchair, shopping or two people and leaves the staircase clear for everyone else. For wheelchair users, or for anyone wanting a longer-term solution in an Egremont home, a platform lift is usually the more flexible and comfortable choice.

Yes. We service and maintain every lift we install across Egremont and west Cumbria, including Cleator Moor, St Bees, Frizington, Bigrigg and Whitehaven. Our engineers provide planned maintenance visits and respond to call-outs, keeping your lift safe and reliable in line with EN 81-41. Regular servicing also protects the warranty and the smooth running you depend on, whether the lift is in a home, a shop or an office.

Less than many people expect. A through-floor lift needs only the footprint of its platform, about a square metre, with clear space in the room above for it to surface. There is no deep pit and no machine room to find space for. In a compact Egremont cottage we can often set the lift into a corner or against a wall, keeping the room usable and the staircase fully open.

Yes. Every Egremont installation is carried out by our own trained teams rather than subcontractors, and we hold SafeContractor accreditation under CN8516. Our lifts are installed to EN 81-41, comply with Part M of the Building Regulations and BS 8300:2018, and each one is tested, certified and signed off before handover. That accreditation means the same standards on every job, from a miners' terrace to a public building.